Modules DRAM & Solutions Disques à circuits intégrés (SSD)


Founded in 2001, ADATA is the world’s second largest DRAM module manufacturer and the fourth largest solid-state drives manufacturer, with over 300 patents and three manufacturing plants.

The ADATA Industrial Solutions group caters to OEM manufacturers requiring extended operating temps, longer life cycles and controlled BOMs as well as higher reliability and customized solutions.

With monthly production capacities of 3M+ DRAM modules, ADATA offers DDR3/DDR3L and DDR4 DRAM modules in SO-DIMM, LR-DIMM, R-DIMM, VLP DIMM, U-DIMM packages, in ECC and non ECC solutions, with capacities ranging from 1GB to 64GB.

Features include very low profiles, load reduced, wide temperature ranges, custom labelling and controlled BOM and a lifetime warranty for all DRAM modules.

With monthly production capacities of 1M+ SSD, ADATA offers SLC, MLC, TLC and 3D NAND based flash solutions, including:

  •  PCIe solutions M.2 (2280).
  •  SATA solutions 2.5”, M.2 (2280/2260/2242), mSATA, mini and micro SATA, SATA DOM (Disk on Module).
  •  USB internal modules, eUSB and USB removable drives.
  •  Removable cards including CFAST, Compact Flash, SD and µSD form factors.


ADATA has developed a number of tools to ensure higher reliability of their SSD based solutions, such as:

  •  PLP (Power Loss Protection) including integrated super caps in larger form factors.
  •  A+SLC to emulate SLC performance in an MLC based drive.
  •  A+Sorting algorithms to enhance the integrity and reliability of NAND Flash products.
  •  Live Monitor Toolbox to permit developers to monitor SSD reliability and life span in their specific applications.

ADATA flash storage solutions are offered in three distinct operating temperature ranges, namely commercial 0-70°C, extended -10°C-80°C and full industrial -40°C-85°C.

Contact your local Orion Representative to find out more about ADATA Industrial Solutions.




Fujipoly TIM ‘’Thin Film’’ à basse résistance thermique.

Sarcon® 20GAR from Fujipoly® is high-performance, glass fabric reinforced thermal interface material. GAR is a great choice for cooling high-power applications that commonly use an insulated gate bipolar transistor (IGBT) to regulate electrical current.

  •  Thermal resistance: 0.17°Cin2/W
  •  Thermal conductivity: 3.0 W/mK
  •  Operating temperature: -40°C to +150°C
  •  Thickness: 0.20mm
  •  Form: sheet, roll, die-cut shapes

For more info, contact your local Orion Representative

Johanson Technology, nouvelle gamme de filtres résonateurs co-axiaux.

These high rejection ceramic coaxial resonator filters were specifically designed for applications that require splitting the unlicensed 5GHz spectrum into two or more bands that are very close together such as 802.11ax, UNII, U-NII Low, U-NII High, U-NII Upper, U-NII-2A, and U-NII-3. These passive surface mount (SMD/SMT) ceramic mono-block cavity filters offer excellent narrow band filtering performance and are able to reject 50dB in less than 160MHz. AEC-Q200 Automotive Qualification available if required.

For datasheets, samples and/or pricing, contact your local Orion Representative.

Hirose introduit remplacement miniature pour RJ45, séries IX.

Hirose has developed a rugged I/O connector that combines a small robust design with high-speed data transmission capabilities that enables industrial equipment advancements in smart manufacturing.


The IX Series connector reduces installation space by up to 75% compared to RJ45 solutions, and up to 28% compared to competing snap-in I/O connectors. Supporting CAT5e and CAT6a (10G) cabling, the IX Series I/O connector features an optimized EMI/ESD shielding design for safe and secure data transmission up to 10Gbps.

Offered in upright right angle and horizontal right-angle versions, the IX Series I/O has maximum dimensions of 22.9mm x 8.4mm x 14.3mm. The upright right-angle connector receptacles can be mounted in parallel with a pitch distance of only 10mm. The narrow width of the receptacle is particularly beneficial when multiple connectors are positioned on a single PCB side-by-side.

Featuring a rugged and reliable design, the snap-in I/O connector has a positive metal lock with a preload spring mechanism that provides a clear tactile click and ensures complete, secure mating. The preloaded springs are designed to prevent unintended cable removal, and to extend the operating life to more than 5000 mating/unmating cycles.

The receptacle shell is mounted on the PCB via a through-hole solder legs to enhance PCB retention and to resist the wrenching of the cable assembly, protecting the SMT leads. The wire-termination unit and cable clamp are integrated into a single plug shell, which prevents the connecting part of the cable assembly from being affected by the load on the cable.

Because the IX Series connector’s receptacle supports THR soldering as a substitute for manual soldering, the receptacle can be mounted on the PCB containing both THT and SMT components in a single SMT process. This also contributes to the high PCB retention force.

The IX Series I/O connector has a rated current of 0.5A (all pins), 1A (any 2 pins), 2A (pin No. 1 and No. 8 only). With an operating temperature range of -40°C to +80°C, the IX Series connector has a rated voltage of 30V AC.

Contact your local Orion Representative for additional information.

Leader Tech ‘’KIT’’ Tech Clip/ Blindage PCB maintenant disponible.

Leader Tech offers a do-it-yourself kit which contains everything a design engineer needs to create and assemble a high-performance PCB shield prototype without special tools or experience. This Kit was developed in order to assist design engineers to streamline the development and EMI test stages of their project. They can cut and form a one-piece board level shield to their exact specifications.

Kit includes:                                                 

 • 20 - Tech Clips in standard tape and reel packaging for high-speed automated placement

 •  2 - 60mm x 80mm x 0.25mm Tech Clip Covers

Contact your local Orion Representative for additional information.

Davies Molding Presse-étoupes (Cable glands) fournissent une étanchéité complete ainsi que préviennent l’abrasion.

Davies Cable Glands are designed to create a complete seal in enclosures or panel cut outs where cabling, wiring or tubing passes through. They also protect cables from abrasion. These cable glands are manufactured using Polyamide (Nylon), and come with a locking nut and O-ring.

Features and Benefits

  • Nylon cable gland provides excellent impact resistance and durably in optimum conditions with full insulation.
  • Protects enclosures against elements like water, dust and debris.
  • Prevents cabling, wiring or rubbing passing through from abrasion.
  • Supplied with security plastic nut and NBR O-ring.
  • Cable Gland material: Polyamide (Nylon) UL94 V-2.
  • Seal Rating: IP 67.
  • Operating temperature: -30 C to 120 C Dynamic.
  • RoHS and REACH complaint.
  • Different available sizes and metric threads.
  • Supplied pre-assembled.

Contact your local Orion Representative for additional information.

ECS Crystal offre un crystal 32.768KHz dans un boitier de 2.0 mm x 1.2 mm x 0.6 mm.


ECS-.327-CDX-1082 is a low ESR (60 K Ω typ.), low CL (4 pF), miniature SMD crystal. The 2.0 mm x 1.2 mm x 0.6 mm (LWH) ceramic package is ideal for today's SMD manufacturing environment.

This part is ideal for low power microprocessors.

Contact your local Orion Representative.

XFMRS XLR/RJ45 série combo.


Transformers Inc. has developed an RJ45 housed in a XLR connector housing. This series can accommodate any standard RJ45 ethernet plug and was designed to fit in standard pinout for any ethernet application.

Additional Features:

• 10/100 to Gigabit ethernet speeds available.

• LED pipes optional.

• Shielded design.

• Improved latch lock system.

• Custom variations available upon request.

Contact your local Orion Representative for a free IoT development kit.

Ohmite Manufacturing signe une entente de distribution mondiale avec Future Electronics

Ohmite Manufacturing, a leading manufacturer of electronic resistors, heat sinks, heaters and custom assemblies has recently signed a new global distribution agreement with Future Electronics.

Contact your local Orion Representative for further information.

GlobTek connecteur ‘’Barrel plug’’ peut être utilisé dans des applications jusqu’à 10A.


GlobTek offers a molded coaxial barrel plug in 5.5x2.5mm format rated up to 10A of current. The molded barrel plug is offered in both straight and angled format. Custom plug over molds available upon request.

This solution is equivalent to common S10K, S10KS12, S10KS17, S10, S1017, S1015, S1012, S10KS15, CAS1007984, CARAS1007984 plugs.

GlobTek has a core competence in both designing partially or completely customized plugs or implementing customer specific designs.

GlobTek manufactures such solutions as input and output connectors for power supplies as well as stand-alone cable assemblies.

Contact your local Orion Representative for further information.

Delta Groupe thermique introduit série de ventilateurs DC à bas bruit, THD bionic blade.

The THD series boasts newly designed bionic blades inspired by nature’s most powerful winged predators.

This fan series represents the most quiet, fast, powerful, and efficient design Delta has to offer. Engineers managed to apply the posture and wing structures of an osprey in flight to design fan blades via parameterized and simulated processes. By simulating the curve of an osprey’s wing in flight, the new THD series fan reduces fan noise up to 6dB-A. THD fans offer different sizes of products, from SQ80mm to OD200mm.

Products Features

● Higher performance at lower noise

● More powerful cooling solution

● 45% higher bionic fan efficiency

● High strength blade design

● Advanced motor driving tech

Contact your local Orion Representative for further information.

Delta Power nouvel étroit PSU DIN Rail 960W vient avec homologations maritimes.

Delta Electronics has added a new 24V/40A output to the CliQ M series of DIN rail power supply. The CliQ M series has the highest power density among the CliQ family and is also the first series in the CliQ family to feature Advanced Power Boost (APB). APB works to protect the system by ensuring continuous operation when a large inrush current is detected due to faulty load on a multiple load connection. The DRM-24V960W1PN allows remote shut-down using an external switch or voltage as well as adjustment of the output voltage. With a protected microcontroller inside the power supply, it acquires and stores operating data during the life of the power supply, which can be used for troubleshooting analysis.

Like the rest of the other models in the CliQ M series, it includes major international approvals such as maritime approval (environmental category: C, EMC 2), IEC/EN 61558-2-16 (safety of power supplies), IEC/EN 61010-1 (electrical equipment for measurement, control) and UL 508 (Industrial Control Equipment); Conforms to harmonic current IEC/EN 61000-3-2, Class A. All models are fully compliant with RoHS Directive 2011/65/EU for environmental protection.


Highlights & Features

  • Universal AC input voltage range
  • Built-in active PFC with up to 95.5% efficiency
  • Full power from -25°C to +60°C @ 5,000m (16,400 ft.)
  • Power Boost of 150% up to 7 seconds
  • Advanced Power Boost (APB) – Prevents system shutdown due to faulty load on a multiple loads connection
  • DNV GL and ABS approvals for maritime applications
  • Built-in DC OK Contact and LED indicator for DC OK/ Overload
  • Conformal coating on PCBAs to protect against common dust and chemical pollutants
  • Current sharing for parallel connection / Output Voltage remote adjustment / Internal Data Logging for troubleshooting

Contact your local Orion Representative for further information.

Wakefield-Vette nouvelle série de dissipateurs pour DELs et éclairage.

Wakefield-Vette’s HiBay LED Heat Sink is the optimal choice for any of the industries LED array’s that require a natural convection cooling method.

The unique mounting puck allows for machining patterns for historical, current, and future LED Module Hole Patterns for manufacturers such as Bridgelux, Cree, Dialight, Lumileds, etc.

The HiBay Series is available in standard lengths of 6”, 8”, 10” and 12” and can be pre-machined for your specific array.

Other Lengths are available upon request

Contact your local Orion Representative for additional information.

Fujipoly TIM ‘’ Thin Film’’ est un étalon à 17 W/m°K.


Sarcon® XR-Um is a putty-like thermal interface thin film that sets a new standard for performance and compressibility. It is an ideal option for transferring heat from medium to high-power semiconductors to a heatsink.

  • Thermal conductivity: 17 W/m°K
  • Thermal resistance: 0.02 °Cin2/W
  • Operating temperature: -40°C to 150°C
  • UL94 V-0 certified
  • Low molecular siloxane content


Contact your local Orion Representative for additional information, evaluation boards and/or samples.

Hirose série de connecteurs hautes vitesses ER8 est une seconde source à la série Edge Rate de Samtec.


The ER8 Series supports high-speed transmission for industrial applications with contacts optimized for signal integrity performance to ensure reliable high-speed transmission performance.


Features and Benefits:

  • 10⁺Gbps transmission speeds
  • .8mm pitch
  • Offered in both straight and right-angle mating variations
  • Stacking heights of 7 / 9 / 10 / 12mm
  • Number of Contacts: 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 100 / 120pos
  • Large mating guide for easy mating.: Alignment on plug provides easy insertion operation.

For more information, contact your local Orion Representative.

Johanson Technology Mini Filtre 2.4GHz passe-bas, EIA 0402.


This low loss harmonic filter (LPF) is ideal for small form-factor devices such as LoRa tags, BLE, wearables, battery operated, Zigbee, small RF modules, and goes very well with reference designs.

It occupies very little PCB space when mounted right on the 50ohm trace.

Automotive AEC-Q200 version is available upon request.

Samples and evaluation boards are readily available.

For more information, contact your local Orion Representative.

Delta série PMH de PSU pour panneaux offre une homologation NEC Class 2.


Delta Electronics extends the PMH series of panel mount power supply with 24V 91.2W output certified to NEC Class 2. The PMH-24V100WCNS accepts universal input from 85Vac to 264Vac in a full corrosion resistant aluminium body.      The NEC Class 2 model is specifically designed for household electrical appliances with safety approvals to pollution degree 3 as well as including IEC/EN 60335-1, IEC/EN 61558-2-16, IEC/EN/UL 60950-1 (with NEC Class 2). In addition, the product meets the EMC approvals to EN 55014-1 / EN 55014-2 for household appliances and EN 61000-6-1 / EN 61000-6-3 for residential environment without extra EMI filter required.



Highlights & Features

  • Household appliance approvals for pollution degree 3 to IEC/EN 60335-1,

    IEC/EN 61558-1 and IEC/EN 61558-2-16
  • Universal AC input voltage
  • Withstand line input voltage surge 300Vac up to 7 seconds
  • Full power from -20°C to +50°C operation @ 5000m or 16400 ft. altitude
  • Full corrosion resistant aluminium casing
  • No load power consumption < 0.3W @ 115Vac, < 0.5W @ 230Vac
  • Built-in DC OK Contact and LED indicator for DC OK/ Overload
  • Low earth leakage current < 0.75mA
  •      NEC Class 2 certified

For more information, contact your local Orion Representative.